|FOR IMMEDIATE RELEASE
June 23, 1995
Release # 95-137
|CPSC: Kate Premo
(301) 504-0580, Ext. 1187
CPSC, Black & Decker Announce
Inspection and Repair Program For 1710 Type 1 Miter Saw Electrical Cords
WASHINGTON, D.C. - In cooperation with the U.S.
Consumer Product Safety Commission (CPSC), Black & Decker (U.S.) Inc. is urging
approximately 7,500 owners of Black & Decker 1710 Type 1, 10-inch Miter Saws to
inspect the electrical cords for nicks, cuts, or punctures. The electrical cords may have
come in contact with the mounted saw blade during shipment, which could result in a
possible shock hazard from a damaged cord.
Consumers should examine the saw's entire 6-foot electrical cord for any nicks, cuts, or
punctures. If even a small nick in the cord is found, stop using the miter saw immediately
and return it to the Black & Decker retailer from which it was purchased for a free
replacement saw. Consumers can also take the miter saw to a Black & Decker Service
Center to have the electrical cord replaced free of charge.
Black & Decker has received no reports of personal injury or property damage. The
company is initiating this inspection program to prevent the possibility of injury.
This inspection program affects the 1710 Type 1, 10-inch saws with date codes between
9501-9516, located on the underside of the saw's handle. These saws were sold nationwide
from February to mid-April 1995 through large and small retailers, discount outlets, and
hardware stores. No other Black & Decker product is involved in this program.
For help in identifying saws, and for questions about the saws or this inspection program,
call Black & Decker at (800) 762-6672.
The U.S. Consumer Product Safety
Commission protects the public from the unreasonable risk of injury or death from 15,000
types of consumer products under the agency's jurisdiction. To report a dangerous product
or a product-related injury and for information on CPSC's fax-on-demand service, call
CPSC's hotline at (800) 638-2772 or CPSC's teletypewriter at (800) 638-8270. To order a
press release through fax-on-demand, call (301) 504-0051 from the handset of your fax
machine and enter the release number. Consumers can obtain this release and recall
information or report product hazards to email@example.com.